CAN/ULC S101
Standard Methods of Fire Endurance Tests of Building Construction and Materials
15-minute stay in place 

CAN/ULC S102 
Standard Method of Test for Surface Burning characteristics of Building Materials and Assemblies 
Flame Spread ≤25, Smoke Development ≤450

CAN/ULC S126
Standard Method of Test for Fire Spread Under Roof-Deck Assemblies
Complies 

CAN/ULC S127 
Standard Corner Wall Method of Test for Flammability Characteristics of Non-Melting Foam Plastic Building Materials Flame Spread ≤350 foam core w/o steel skin

CAN/ULC S138
Standard Method of Test for Fire Growth of Insulated Building Metal Panels in a Full-Scale Room Configuration
Complies 

ASTM E84 
Standard Test Method for Surface Burning Characteristics of Building Materials 
Flame Spread≤25, Smoke Development ≤450

NFPA 286
Standard Methods of Fire Tests for Evaluating Contribution for Wall and Ceiling Interior Finish to Room Fire Growth
Complies 

ASTM E72 
Standard Test Methods of Conducting Strength Tests of Panels for Building Construction 
See Load Charts for load/span and deflection tables

ASTM E1592
Standard Test Method for Structural Performance of Sheet Metal Roof and Siding Systems by Uniform Static Air Pressure Difference
See Load Charts 

ASTM E1646 
Standard Test Method for Water Penetration of Exterior Metal Roof Panel Systems 
No water penetration at 20 psf pressure differential

ASTM E1680
Standard Test Method for Rate of Air Leakage Through Exterior Metal Roof Panel Systems
0.004 cfm/ft2 at 6.27 psf 

ASTM E283 
Standard Test Method for Determining Rate of Air Leakage Through Exterior Windows, Curtain Walls, and Doors Under Specified Pressure Differences Across the Specimen 
0.004 cfm/ft2 at 6.27 psf

ASTM E331
Standard Test Method for Water Penetration of Exterior Windows, Skylights, Doors, and Curtain Walls by Uniform Static Air Pressure Difference
No water penetration at 20 psf pressure differential 

ASTM C518 
Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus 
K-Factor of 0.136 BTU.in/hr.ft2. 0F at 750F

ASTM C1363
Standard Test Method for Thermal Performance of Building Materials and Envelope Assemblies by Means of a Hot Box Apparatus
K-Factor of 0.12 BTU.in/hr.ft2. 0F at 390F

南京睿督公司提供美国/加拿大防火测试标准的检测及咨询

南京睿督公司全国免费咨询电话：400-603-6575   025-8658 3475
网址：www.fire-test.com    www.fire-test.cn
邮箱：info@fire-test.com
 
…