美国SwRI实验室介绍

美国西南研究院（Southwest Research Institute, SwRI）成立于1947年，是一家独立的、非营利性质的、专门从事技术开发和转让的应用研究与开发机构，是美国同类企业中最大的企业之一，该企业根据合同为政府及全球的工业客户进行研究。Southwest Research Institute(SwRI) is a worldwide leader in fire research and testing for compliance with building codes, maritime codes and government specifications. 美国SwRI实验室在火灾研究及测试认证方面处于世界领先地位，符合建筑规范、IMO海事规范和政府规范。国内咨询电话：025-8658 3475。

南京睿督公司携手美国SwRI实验室提供如下美标防火耐火检测报告，测试标准如下：

10 CFR 50Fire Tests of Penetration Seals, Protective Envelope and Flexible Barriers
10 CFR 71Package and Transportation of Radioactive Material
16 CFR, Part 1633Standard for the Flammability (Open Flame) of Mattress Sets
16 CFR, Section 1500.45Determining Extremely Flammable Contents of Self-Pressurized Containers (Similar to ASTM D 3065)
ABD 0031Fire-Smoke-Toxicity (FST) Test Specification (Airbus Industries) 

AC11 Sect. 5.3.5 and Sect. 5.4.5Comparative Bond Test
AC11 Sect. 5.4Freeze/Thaw Test
AC24Sections 6.7, 6.9, 6.10, 6.11 Exterior Insulation and Finish System
AC59Direct-applies Exterior Finish System
AITM 2.0007Determination of the Specific Optical Smoke Density of Aircraft Interior materials 

AITM 3.0005Determination of Specific Gas Components of Smoke Generated by Aircraft Interior Materials
ANI/MAERPFire Tests of Protective Envelope Systems
API 16DSpecification for control systems for drilling well control equipment and control systems for diverter equipment
API 607Fire Test for Quarter-turn Valves and Valves Equipped with Nonmetallic Seats
API 6FSpecifications for Fire Test for valves

ASTM C1166 Flame Propagation of Dense and Cellular Elastomeric Gaskets and Accessories
ASTM D1929Ignition Properties of Plastics
ASTM D2015Gross Calorific value of Coal and Coke by the Adiabatic Bomb Calorimeter
ASTM D2540Drop-Weight Sensitivity of Liquid Monopropellants 
ASTM D2859Flammability of Finished Textile Floor Covering Materials 

ASTM D2863Standard Test Method for Measuring the Minimum Oxygen Concentration to Support Candle-Like Combustion of Plastics (Oxygen Index)  

ASTM D3014Flame Height, Time of Burning, Mass Loss of Rigid Thermoset Cellular Plastics in a Vertical Position 

ASTM D3065Determining Extremely Flammable and Flammable Contents of Self-Pressurized Containers (Similar to 16 CFR, Section 1500.45)
ASTM D3675ASTM Test for Surface Flammability of Materials Using a Radiant Energy Source
ASTM D5485Standard Test Method for Determining the Corrosive Effect of Combustion Products Using the Cone Corrosimeter
ASTM D568Flammability of Flexible Plastics
ASTM D635Rate of Burning and/or Extent and Time of Burning of Self-Supporting Plastics in a Horizontal Position
ASTM E108Fire Tests of Roof Coverings 

ASTM E119Fire Tests of Building Construction and Materials
ASTM E1232 Temperature Limit of Flammability of Chemicals
ASTM E1317Flammability of Marine Surface Finishes
ASTM E1321Determining Material Ignition and Flame Spread Properties
ASTM E1352Cigarette Ignition Resistance of Mock-Up Upholstered Furniture Assemblies  

ASTM E1353Cigarette Ignition Resistance of Components of Upholstered Furniture 
ASTM E1354Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter (Cone Calorimeter)
ASTM E136Behavior of Materials in a Vertical Tube Furnace at 750°C (1382°F)
ASTM E1529 Determining Effects of Large Hydrocarbon Pool Fires on Structural Members and Assemblies
ASTM E1537 Fire Testing of Upholstered Furniture  

ASTM E1590Fire Testing of Mattresses 
ASTM E162Surface Flammability of Materials Using a Radiant Heat Energy Source
ASTM E1725 Fire Tests of Fire-Resistive Barrier Systems for Electrical System Components 
ASTM E1740 Determining the Heat Release Rate and Other Fire-Test-Response Characteristics of Wallcovering Composites Using a Cone Calorimeter 
ASTM E1966 Fire-Resistive Joint Systems  

ASTM E1995Measurement of Smoke Obscuration Using a Conical Radiant Source in a Single Closed Chamber, With the Test Specimen Oriented Horizontally
ASTM E2010Positive Pressure Fire Tests of Window Assemblies 
ASTM E2074Fire Tests of Door Assemblies
ASTM E2079Limiting Oxygen (Oxidant) Concentration in Gases and Vapors
ASTM E2307 Perimeter Joint Test 

ASTM E487Constant-Temperature Stability of Chemical Materials
ASTM E648Critical Radiant Flux of Floor Covering Systems Using a Radiant Heat Energy Source [NIST (NBS) Flooring Radiant Panel]
ASTM E659Standard Test Method for Autoignition Temperature of Liquid Chemicals
ASTM E662Specific Optical Density of Smoke Generated by Solid Materials (Smoke Chamber)
ASTM E680Drop Weight Impact Sensitivity of Solid-Phase Hazardous Materials

ASTM E681Concentration Limits of Flammability of Chemicals 
ASTM E695-97Method for Measuring Relative Resistance of Wall, Floor, and Roof Constructions to Impact Loading
ASTM E771Spontaneous Heating Tendency of Materials 
ASTM E800Gas Sampling Protocol
ASTM E814Fire Tests of Through Penetrations (Seals) 

ASTM E84Surface Burning Characteristics of Building Materials
ASTM E918Standard Practice for Determining Limits of Flammability at Elevated Temperature and Pressure
ASTM E970Critical Radiant Flux of Exposed Attic Floor Insulation Using a Radiant Heat Energy Source (Utilizes E 648 test apparatus-modified)
ASTM F1173 Fire and Hydrostatic Tests of Composite Pipe. Similar to IMO A.753(18)
ASTM F1387Specification for Performance of Piping and Tubing Mechanically Attached Fittings 

ASTM F3059Testing and performance requirements for fiber-reinforced polymer (FRP) gratings used in marine construction and shipbuilding to ensure personnel safety
ASTM G125Measuring Liquid and Solid Material Fire Limits in Gaseous Oxidants
ASTM G72Autogenous Ignition Temperature of Liquids and Solids in a High-Pressure Oxygen-Enriched Environment
ASTM G74Ignition Sensitivity of Materials to Gaseous Fluid Impact  

Bellcore GR-63-CORE (NEBS)Network Equipment Building Services
BOEING BSS 7238Smoke Test (Boeing)
BOEING BSS 7239Toxicity Test (Boeing)
BOEING BSS 7304Determination of Surface Flammability of Materials Using a Radiant Energy Source
BS 476 Part 20, 24Equivalent or similar to ASTM E119 

CA Technical Bulletin 106Smoldering Cigarette Test for Mattress
CA Technical Bulletin 116Cigarette Test of Upholstered Furniture
CA Technical Bulletin 117Flame Retardance of Resilient Filling Materials Used in Upholstered Furniture
CA Technical Bulletin 121Flame Retardance of Resilient Filling Materials Used in Upholstered Furniture
CA Technical Bulletin 129Flammability Test for Mattresses for use in Public Buildings 

CA Technical Bulletin 133Flammability Test Procedure for Seating Furniture for Use in Public Occupancies
CA Technical Bulletin 603Open-Flame Standard for Mattresses
CA Technical Bulletin 604Bed Clothing Open-Flame Standard
CAL-19California, State of, Title 19, Chapter 8, Articles 1-11 CAL-19California, State of, Title 19, Chapter 2, 1237.1 
California Building Code Chapter 7A; CA SFM 12-7A-1Materials and Construction Methods for Exterior Wildfire Exposure: Exterior Wall Siding and Sheathing 

California Building Code Chapter 7A; CA SFM 12-7A-2Materials and Construction Methods for Exterior Wildfire Exposure: Exterior Windows
California Building Code Chapter 7A; CA SFM 12-7A-3Materials and Construction Methods for Exterior Wildfire Exposure: Horizontal Projection Underside (Soffit)
California Building Code Chapter 7A; CA SFM 12-7A-4Materials and Construction Methods for Exterior Wildfire Exposure: Decking
California Building Code Chapter 7A; CA SFM 12-7A-5Materials and Construction Methods for Exterior Wildfire Exposure: Ignition Resistant Material
Can/ULC S102 (Canada)Canadian Safety Standard 102.2, Equivalent or similar to ASTM E84
CGA C14Procedures for Fire Testing of DOT Cylinders Pressure Relief Device Systems 

DOC-FF-1-170Equivalent or similar to ASTM D 2859
DoD (Various)Safety and Performance Tests for Qualification of Explosives and Explosives Hazards Classification
DOT 49 CFR 393.67Liquid Fuel Tanks
Drager TubesColorimetric Toxicity
ECE R100Annex 8E Battery Electric Vehicle Safety
ECE R34Annex 5, “Testing of Fuel Tanks Made of Plastic Material”
EN 13501-1Fire Classification of Construction Products Using Reaction to Fire Tests
EN 13823Reaction to fire tests for building products, excluding floorings, exposed to the thermal attack by a single burning item (SBI)
EN ISO 11925-2Ignitability of building products subjected to direct impingement of flame -- Part 2: Single-flame source test 

EPA T0-15Determination of Volatile Organic Compounds (VOCs) by GC-MS
FAR Part 23.853Vertical Bunsen Burner Test for Passenger and Crew Compartment Interiors 
Fire Block Test of SeatsNational Standards for School Buses and School Bus Operations
FM 4880 Flammability Apparatus, Room Corner Test, 25 ft and 50 ft Corner Test
FM 4910Clean Room Tests 

FM 4922Flame/Smoke Exhaust Ducts
FM 4995Commodity Classification of Idle Plastic Pallets
FM 6930Flammability Classification of Industrial Fluids
FMCSA 49 CFR 393.67 (Federal Motor Carrier Safety Administration)Safety Venting Test Pressure Resistance Leakage Test Drop Test Fill Pipe Test
FMVSS 304Compressed Natural Gas (CNG) Fuel Container Integrity 

FTIRToxic Gas Analysis
FTS 191Various Test Methods:?
5903: Vertical 12- or 60-second Flame Test for Fabrics
5906: Horizontal 12- or 60-second Flame Test for Fabrics
5908: 45o Angle 12- or 60-second Flame Test for Fabrics

FTS 372Equivalent or similar to ASTM E648
IEEE 1202Flame Testing of Cables for Use in Cable Trays
IEEE 1717Testing Circuit Integrity Cables using a Hydrocarbon Pool Fire Test Protocol
IEEE 1844Procedure for Determining Circuit Integrity Performance of Fire Resistive Cables in Nuclear Facilities
IEEE 383Wire/Cable Vertical Flame Test 

IEEE 634Equivalent or similar to ASTM E814
IEC 60332-3-2 or EN 50266-2-1Tests on electric and optical fibre cables under fire conditions - Part 3-24: Test for vertical flame spread of vertically-mounted bunched wires or cables - Category C
IEC 60332-3-23 or EN 50266-2-3Tests on electric and optical fibre cables under fire conditions - Part 3-23: Test for vertical flame spread of vertically-mounted bunched wires or cables - Category B
IEC 60332-3-24 or EN 50266-2-4Common tests methods for cables under fire conditions - test for vertical flame spread of vertically-mounted bunched wires or cables - Part 2-4: Procedures - Category C

IMO A.653(18)Surface Flammability of Bulkhead, Ceiling, and Such Finish Materials
IMO A.753 (18)Guidelines for the Application of Plastic Pipes on Ships. Similar to ASTM F 1173
IMO FTP Code Part 1Non-Combustibility Test
IMO FTP Code Part 2Smoke and Toxicity Test
IMO FTP Code Part 3 (A.754(18))Recommendation of Fire Resistance Tests for "A," "B," and "F" Class Divisions 

IMO FTP Code Part 5Test for Surface Flammability
IMO FTP Code Part 6Test for Primary Deck
IMO FTP Code Part 7Test for Vertically Supported Textiles and Films
IMO FTP Code Part 8Test for Upholstered Furniture
IMO FTP Code Part 9Test for Bedding Components 

IMO Resolution MSC.40(64)Fire Restricting Materials (ISO 9705)
ISO 1182 Non-Combustibility of Materials
ISO 14692-2Petroleum and Natural gas industries Glass-Reinforcer Plastics Piping
ISO 15029Determination of spray ignition characteristics of fire-resistant fluids
ISO 15540Ships and Marine Technology - Fire Resistance of Hose Assemblies

ISO 15541Ships and Marine Technology - Fire Resistance of Hose Assemblies
ISO 1716Heat of Combustion – Determination of the Calorific Value
ISO 20823Determination of the flammability characteristics of fluids in contact with hot surfaces -- Manifold ignition test
ISO 22899-1Determination of the resistance to jet fires or passive fire protection materials
ISO 5659 Part 2Optical Density Test 

ISO 5660Rate of Heat Release from Building Products (Cone Calorimeter Method)
ISO 834Fire Resistance Test
ISO 9239-1Determination of Burning Behavior Using a Radiant Heat Source
ISO 9705Room/Corner Test
MIL-STD-810, Method 511Explosive Atmosphere  

MIL-T-24708(SH)Quarter-Scale Tests
NES 711Determination of Smoke Index of the Products of Combustion from Small Specimens of Materials
NES 713Bunsen Burner Flame Test with Draeger Tube Toxicity Determinations
NFPA 130Standard for Fixed Guideway Transit and Passenger Rail Systems: This standard specifies fire protection and life safety requirements for underground, surface, and elevated fixed guideway transit and passenger rail systems.
NFPA 251Equivalent or similar to ASTM E119
NFPA 252Equivalent or similar to ASTM E152
NFPA 253Equivalent or similar to ASTM E648
NFPA 255Equivalent or similar to ASTM E84
NFPA 256Equivalent or similar to ASTM E108 

NFPA 258Equivalent or similar to ASTM E662
NFPA 259Potential Heat of Building Materials
NFPA 260Cigarette Ignition Resistance of Components of Upholstered Furniture
NFPA 261Resistance of Mock-Up Upholstered Furniture Material Assemblies to Ignition by Smoldering Cigarettes
NFPA 265Equivalent or similar to UBC 8-2 

NFPA 266Test of Upholstered Furniture Exposed to Flaming Ignition Source
NFPA 267Test of Mattresses and Bedding Assemblies Exposed to Flaming Ignition Source
NFPA 268Radiant Panel Test Exterior Wall Systems
NFPA 271Equivalent or similar to ASTM E1354
NFPA 275Thermal Barrier Test, Similar to UBC 26-2 

NFPA 285Method of Test for the Evaluation of Flammability Characteristics of Exterior, Nonload-bearing Wall Assemblies Containing Combustible Components Using the Intermediate-Scale, Multistory Test Apparatus (ISMA)
NFPA 286Standard Methods of Fire Tests for Evaluating Contribution of Wall and Ceiling Interior Finish to Room Fire Growth
NFPA 290Jet Fire
NFPA 30/30A Flammable and Combustible Liquids Code
NFPA 37Standard for the installation and use of stationary combustion engines and gas turbines 

NFPA 415Airport Terminal Buildings, Fueling Ramp Drainage, and Loading Walkways
NFPA 417Fire Tests of Aircraft Loading Walkways
NFPA 58 Storage and Handling of Liquefied Petroleum Gases. Equivalent or similar to 49 CFR Section 179.105-4 and 179-105-7
NFPA 701/UL 214 Test 1/Test 2Fire Tests for Flame-Resistant Textiles and Films: Large Scale and Small Scale
OTI 95/634Jet Fire Test 

SAE J1527Marine Fuel Hose Fire Resistance Tests
SAE J1942Hose and Hose Assemblies for Marine Applications
SAE J2464Electric and Hybrid Electric Rechargeable Energy Storage System (RESS) Safety and Abuse Testing
SBI - EN 13823European Single Burning Item Test
School Bus SeatSchool Bus Seat Upholstered Fire Block Test 

SMP 800-CBombardier Toxicity Test
STD791C, Method 6052.1High Temperature-High Pressure Spray Ignition Test
STD791C, Method 6053.1Manifold Ignition Test
SwRI 00-01Fire Performance Evaluation of Fondue Pot Burners 

SwRI 91-01Small Scale Fire Test for Paper, Corrugated Board, and Thin Materials
SwRI 93-01Fire, Hose Steam, Impact, Ballistic and Leakage Tests
SwRI 95-03Testing Requirements for Multi-Hazard Aboveground Flammable Liquid/Fuel Storage Tanks
SwRI 97-02Hydraulic Test of Automobile Fuel Tank
SwRI 99-01Testing Requirements for Liquid Hydrocarbon Pool-Fire Testing of Aboveground Flammable Liquid/Fuel Storage Tanks (AST) and Liquid Petroleum Gas (LPG) Storage Tanks Containing Fuel 

UBC 17-3See New Common Code UBC 26-2
UBC 17-5See New Common Code UBC 26-3
UBC 17-6See New Common Code UBC 26-4
UBC 26-2Evaluation of Thermal Barriers (Formerly UBC 17-3)
UBC 26-3Room Fire Test for Interior of Foam Plastic Systems (formerly UBC 17-5) 

UBC 26-6Ignition Properties of Plastics
UBC 26-7Method of Test for Determining Classification of Approved Light-Transmitting Plastics
UBC 26-9Method of Test for the Evaluation of Flammability Characteristics of Exterior, Nonload-bearing Wall Assemblies Containing Combustible Components Using the Intermediate-Scale, Multistory Test Apparatus (ISMA)
UBC 42-1See New Common Code UBC 8-1
UBC 42-2See New Common Code UBC 8-2 

UBC 43-6See New Common Code UBC 7-5
UBC 7-2Fire Tests of Door Assemblies
UBC 7-5Fire Tests of Through-Penetration Fire Stops (formerly UBC 43-6)
UBC 8-1Surface Burning Characteristics of Building Materials. Equivalent or similar to ASTM E84 (Formerly UBC 42-1) 

UBC 8-2Evaluating Room Fire Growth Contribution of Textile Wallcovering (Formerly UBC 42-2)
UFC 79-7Aboveground Storage Tanks
UL 10A and 10BEquivalent or similar to ASTM E152
UL 1479Equivalent or similar to ASTM E814
UL 155Equivalent or similar to ASTM E152
UL 162Standard for Foam Equipment and Liquid Concentrates

UL 1684Reinforced Thermosetting Resin Conduit (RTRC) and Fittings
UL 1685Vertical Tray or FT4 CL2 

UL 1685Fire Tests for Data Cables
UL 1709Standard for Rapid Rise Fire Tests if Protection Materials for Structural Steel Equivalent or similar to UK-DOE Fire Curve, Mobil Fire Curve, and NPD Fire Curve
UL 1715Fire Test of Interior Finish Material
UL 1975Fire Test of Foamed Plastics Used for Decorative Purposes
UL 199Automatic Sprinklers for Fire-Protection Service
UL 2024Standard for Test Method for Flame and Smoke Characteristics of Nonmetallic Raceway Used in Environmental Air-Handling Spaces 

UL 2043Fire Test for Heat and Visible Smoke Release for Discrete Product and their Accessories Installed in Air-Handling Spaces
UL 2080Fire Resistant Tanks for Flammable and Combustible Liquids
UL 2085Fire, Hose Stream, Impact, Ballistic and Leakage Tests. Equivalent or similar to UFC Appendix II-F, 79-7
UL 2218Impact Resistance Test of Prepared Roofing
UL 2335Fire Tests of Storage Pallets 

UL 555Fire Dampers and Ceiling Dampers
UL 711Standard for Rating and Fire Testing of Fire Extinguishers
UL 72Tests for Fire Resistance of Record Protection Equipment
UL 723Equivalent or similar to ASTM E84
UL 790Equivalent or similar to ASTM E108 

UL 9Equivalent or similar to ASTM E163
UL 94Standard Tests for Flammability of Plastic Materials for Parts in Devices and Appliances
UN Practices & ProceduresVarious HazMat Classification Procedures, Test Methods and Criteria, Transport of Dangerous Goods  

南京睿督公司专业从事轨道车辆材料十多年，在防火耐火测试认证领域拥有丰富的经验，具体测试内容，请咨询南京睿督公司
南京睿督公司免费咨询电话：025-86583475  400-603-6575
网址：www.fire-test.com   www.fire-test.cn
邮箱：info@fire-test.com 

…